Trophy Shield Large Stag Skull 9-1/2 x 19-1/2 Inches with Rear Hanger Cartridge_300 Blackout the rim pulls off and

the rim pulls off and it is almost impossible to remove the stuck case without damaging the die

To use the Lock-N-Load O

the highly respected Competition Bullet Seating Die and a Taper Crimp Die

annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads

489 Sectional Density 0

Trophy Shield Large Stag Skull 9-1/2 x 19-1/2 Inches with Rear Hanger Cartridge_300 Blackout the rim pulls off andThese shields are made from solid Oak and include a convenient hanging plate on the reverse. The shields are elegantly machined and finished with a multi coat laquer ensuring that your trophy is mounted against a beautiful finish. Skull mounting hardware is available to purchase separately.