Pre Amp Rebuild Kit - 4 pin Peterson Tines & Tone Bars • New volume potentiometer cable

• New volume potentiometer cable (requires soldering to existing volume potentiometer)

Alternatively if you'd rather not wire them up yourself you can purchase the Stage Piano Passive Electronics kit instead

This hammer is superior to 1/2 wood hammers due to its strength and consistent uniform shape

If you are in any way unsure of your capabilities to do this installation

There are two types available:

Pre Amp Rebuild Kit - 4 pin Peterson Tines & Tone Bars • New volume potentiometer cableThis rebuild kit is for the Fender Rhodes or Rhodes pianos that have the 4 pin Peterson preamplifier. Included in this kit are: All Electrolytic Capacitors First Stage Transistors 2W Resistors Spare Diodes Spare Transistors For installation please refer to the schematics below. Additionally the transistor pinouts may not match the originals, so check the transistor pinout file below as well. Preamp Rebuild Schematic Peterson Preamp Capacitor Overlay